|
.:
We are looking for some flight Video!!
For those of you who video your flights. We have
many motors that do not have user submitted video yet. Should you be
interested in such a motor we are happy to offer 100% buy back with
the submission of your video. If you question if the motor you are
interested in qualifies for the buy back program feel free to
drop us a line. Check out
the 2835-8, 3536-6, 5055-6, 5055-8, 6362-8,
6362-10 - All Qualify.
.:
We are looking for a motor tester!!
For those of you who have an adequate test stand
we would love to get some 3rd party and lower elevation test stand
numbers. Info should be at least the data we capture from our
testing. Will be done on a buy back basis like the video buy back
program. Buy it - Give us comprehensive data - We refund.
If
you have a specific question about application or would like a
second opinion feel free to drop us a line.
sales@milehighrc.com
.:
The name/numbers
Our outrunners are named by motor size rounded up
to the nearest millimeter. So a 2822 is 28mm in diameter and 22mm in
length (plus the shaft). When doing a direct comparison by the
numbers alone make sure you motor is named by size, or have the size
handy for comparison. For example the 2822 series is a great
replacement for the some of the 2212 outrunners on the market.
We
have a great line of outrunner motors, covering small foam birds
through large scale gas conversions. The current motor
selection is from 80 watts up to 2500 Watts. Again our motors are
very competitively priced, designed to compete with the guys over
seas in price but perform like a motor in a higher price range, and of
course are guaranteed to be from defects. The data you see is from
our personal test stand and are real and accurate numbers.
 2822-27
: 1360KV Outrunner 100 Watts Max
Run this motor on
the smaller birds. Great motor for the 7oz. to 12oz. planes.
Suggest 80 Watt set ups for best most efficient
performance. Try a 2 or 3 cell lipo with an 8 to 12 Amp ESC
Click here to purchase, see test data, and flight video
2826-14 : 1250KV Outrunner 150
Watts Max
Motor is factory rated at 150 Watts but we run it at 180 watts
without issue to date. The motor should be used for general flight
on birds to 30 ounces and 3D flight on birds in the 12oz. to 17 oz.
range. Run a small 3-cell with an 18 Amp ESC. Comparable to 2212
outrunners when names by stator size.
Click here to purchase, see test data, and flight
video
2826-9 : 1820KV Outrunner 15
Watts Max
Factory
suggests 9x4.7 prop on 2-cell for 15 amps. This motor is still in
testing. Look to the product page for further factory info and out
stats.
Click here to purchase, see test data, and flight
video
400XT : Direct Drive
950 KV
10 Amps
This is an excellent motor for
planes up to 16oz. A great park flyer motor operated best on 2-3
cell lipos, 8-18 amp speed controller. Great 3D performance on the
flat foamy type planes, great replacement for GWS type birds. Low
amp draw and great power leads to a very cost effective set up. It
will have you asking how can this 1.5oz. motor pull like that?
Motor only $28.00 - Combo with
an 18 Amp ESC $42.00 - And we pay Shipping!!!
Note we may discontinue this
motor. If you want to see it stay, please drop us a line
sales@milehighrc.com
Click here to purchase, see test data, and flight
video
 2830-12
: 980KV Outrunner 200 Watts Max
Motor is factory rated at 200 Watts but it can
takes bursts to 250 watts without issue. Typical use with 10 and 11
inch props will put you in the 16 watt to 180 watt range. The motor
is a great choice when used for general flight on birds to 32 ounces
and 3D flight on birds to 20 ounces, and propped 1800 watts.
Click here to purchase and see test data
 2830-9
: 1290KV Outrunner 200 Watts Max
The factory rates this motor at 18 Amps max and suggests a
constant current of 16 amps and offers
recommendations of a 9x5 prop.
Click here to purchase and see test data
2835-10 : 830KV Outrunner 220 Watts Max
Motor is factory rated at 220 Watts. Other then some test stand runs
we have not flown this one yet. Data suggest 11 and 12 inch props on
3-cell, with 11x4.7SF or 11x7 E most likely the sweet spot. We would really
like to experiment with this on a small wing with a small prop
and a small 4-cell. Sounds crazy but would be interesting for sure.
Click here to purchase and see test data
2835-8 : 1038KV Outrunner 200 Watts Max
Motor is factory rated at 200 Watts. APC E prop
of 10x7 on 3-cell is suggested.
We will buy back this motor 100%
for the first few people who can provide some flight video.
Click here to purchase and see test data
2835-4 : 1880KV Outrunner
28 Amps Max
Motor is factory rated at 28 Amps Constant with
suggested constant amp draw of 23 Amps.
We will buy back this motor 100%
for the first few people who can provide some flight video.
Click here to purchase and see test data
3536-6 ~ 38 Amps ~ 1270 KV
~ 3.3oz (95g)
Motor is rate at 350 Watts
with a suggested max draw of 38 Amps with 48 Amps burst. Although the
factory suggests a 11x7 prop this is a pretty fast motor and will
require high C value packs if running an 11x7 on 3-cell.
Also testing
a 1520Kv version
Click here to purchase and see test data
 3542-7 ~ 38 Amps ~
730 KV ~ 4.3oz
(135g) ~
450Watts Motor is rated
at 450 watts peak, suggested max amp draw of 38 amps on 4-cell. We
run it on 3-cell 2200's with APC 12x6 E prop, pulls 290 watts,
3-cell 12x8 pulls 319 watts. On 4-cell 2200-2500's (12x6E) maxed at
48 amps. Factory suggests 4-cell with a 12x6 prop pulls 400 watts.
Video 1
Click here to purchase, see test data, and flight video
 3542-6 ~ 40
Amps / 45 Amps Burst ~
920 KV ~ 4.3oz
(135g) ~
450Watts
Nice 400 Watt power house on a
good 3-cell (2200mah 20C or 25C) and Xoar 13x6.5 prop.
Click here
to purchase, see test data, and flight video
 3548-5
~ 38 Amps/45 Amps Peak ~ 890KV ~ 5.7oz. (170g) ~ 450 Watts / 600
Watts Peak
Motor is almost impossible to over amp on 3-cell.
It gives awesome power on 4-cell with a 13x6.5 Xoar prop or APC 12x6
E.
Click here to purchase, see test data, and flight
video
4250-7 ~ 45 Const./57 Burst
Amps ~ 710 KV ~ 6.88oz (195G) ~ 900Watts
Probably our favorite motor of the entire line
up. Rut it with 4-cell lipo capable of 40 to 60 Amps and a 14x7
through 16x8 prop on a 5 pound plane and have some fun!!!
Replacement for a power 32 but 1/2 the price. Comes as show PLUS AN
X MOUINT!!!
Click here to purchase, see test data, and flight
video
5055-6 ~ 58 Amps ~ 720 KV ~
9.52oz (270G) ~ 1500 watts ~ 4-6 Cells Lipo
Factory claims 150 oz.
(9Lbs.) of thrust with a 15x6 prop at 56
amps.
Although we have ran this motor we have
not ran it any higher then 800 watts. Currently setting up a 1000
Watt set up. More info an impressions to come.
Factory Info: 720KV - Io 2.4 - 11-16 NiCd/Mh 3-5 Cell
Lipo - Suggested prop 15x6
5055-6 720KV $68.00 $40.00 -
Overstock Sale
5055-8 560KV ~ 55 Amps ~ 560KV ~ 9.52oz. (270g) ~ 1500 Watts ~
4-6 Cell Lipo.
Awesome Set up for the 5 pound 3D Machines at a fraction of the
cost. Run 5-cell lipos and 15" Props for 1000-1100 Watts.
5055-8 560KV Outrunner $59.00
Video of the 57" Yak 54 -
Here
6362-08 ~ 310KV~ 85
Const./92 Peak Amps ~ 22.9oz (650G) 6-10 Cells Lipo ~ 2450 Watts ~
8mm Shaft
Factory claims 240
oz. (15 Lb.) of thrust with a 18x12 prop at 65 amps.
This is a big daddy
motor a touch bigger then the e-flight 110. Supporting the 120 power
claimed by the factory. I suggest 16x10 props on 9 cells lipos to 20
pound planes. The motor weight is 23oz. 2 1/2" x 2 1/2" Comes as
shown PLUS AN X MOUINT!!!
Combo:
6362-8 with a 110 Amp ESC $164.00 Shipped - Drop us a line
sales@milehighrc.com
$94.00
Free Priority Shipping
6362-10 ~ 250KV~
85 Const./92 Peak Amps ~ 22.9oz (650G) 6-10 Cells Lipo ~ 2450 watts
~ 8mm shaft
Factory suggests a 18x12 prop on 10-cell lipo.
Same motor as the
6362-8 as above but is 250KV. The motor weight is 23oz. 2 1/2" x 2
1/2" Comes as shown PLUS AN X MOUINT!!!
Combo:
6362-10 with a 110 Amp ESC $164.00 Shipped - Drop us a line
sales@milehighrc.com
$94.00
Free Priority Shipping
|
